1. Remove the band saw blade tooth protector gently.2. Loosen the guides to accept the wider blade. 3. Install the new blade on to the guides.4. Tighten the blade and contact the back edge guide rim.5. Lock left and right guide alloy blocks (adjusting screws).6. Run the band saw blade at...
News
How to break in a band saw blade
Ben George
Blade Break-In Select the proper band speed for the material to be cut. Reduce the feed force/rate to achieve a cutting rate 20% to 50% of normal (soft materials require a larger feed rate reduction than harder materials) Begin the first cut at the reduced rate. Make sure the teeth...
Problem Solving
Ben George
Answers to the most commonly faced saw blade problems. Saw Blade Body Cracking Probable Cause : Uneven wear on the side guide wheel. Large gap between the guide wheel and the saw blade causes uneven band tension. Excessive feed rate. The side guide wheel interfering with the tooth groove. Solutions: Adjust...
Safety Instructions
Ben George
Do's and Don'ts- Never touch a running band saw blade during operation.Protective Equipment- Always wear protective goggles.- Wear protective gloves or related protective equipment at all times.- Wear a mask while working with powder materials (such as graphite, cast iron, etc.).Band Saw Blade Preparation- Make sure the saw blade is suitable...
